.
Grid Tie Solar Power Kit
The Solar-Power-Generator is a revolutionary way of cost saving in renewable energy generation.
The solar panels produce what's called DC current. A device called an inverter is required to change the DC power generated by your solar system into AC power that most appliances can use. An inverter is an important piece in your overall solar energy plan.
The solar panels are connected to a grid-tie inverter which is a device that enables solar power users to complement the energy they buy from their electricity supplier with solar power. The inverter converts DC to AC power and sends the extra energy produced back to the utility grid via the electric meter.
At night or during inclement weather all the electricity is supplied by the mains. During the daylight hours, the system generates some power, offsetting the consumption of electricity from the utility and cutting electric bills. The balance of the kWh required by your loads is automatically drawn from the input lines. If the PV panels are producing more electricity than you are using, the system will feed the surplus of the energy back to the utility. It may even spin your electric meter backwards, further reducing your monthly bill.
The Solar Kit is easy to set up and plugs straight in to any mains socket just like your kettle. No need for an electrician.
Installation is simple: secure the solar panels to the aluminum stand and connect the ready made cables. Position on your patio, garden or balcony, anywhere the sun shines. No tools or electrical skills are required, not even a screwdriver.
3000 Watt Grid-Tie Solar Power Kit, SG-3KW
This SG-3KW kit Includes:
250W Polycrystalline Solar Panel
|
ASNM250P-60 Series Polycrystalline Silicon PV Panel
|
|
STC: Irradiance 1000 W/m2, 25°C, AM=1.5 according to EN 60904-3) |
Module Type |
250P-72 |
Module Efficiency ŋm(%) |
15,37 |
Cell Efficiency ŋc(%) |
17,54 |
Power Peak Pm(W) |
250 |
Maximum Power Voltage Vm(V) |
30,71 |
Maximum Power Current Im(A) |
8,14 |
Open Circuit Voltage Voc(V) |
44,23 |
Short circuit current Isc(A) |
8,81 |
Maximum System Voltage (VDC) |
1000 |
Power output tolerances ( % ) |
±3 |
Max-Series Fuse (A) |
20 |
Operating/Storage Temp. (°C) |
-40 ~85 |
Dielectric Insulation Voltage (VDC) |
3000 max |
TEMPERATURE CHARACTERISTICS - STC
|
NOCT–Nominal Operating Cell Temperature |
45±2°C |
Pm Temperature Coefficient (%/°C) |
-0.44 |
Voc Temperature Coefficient (%/°C) |
-0.36 |
Isc Temperature Coefficient (%/°C) |
0.033 |
|
Cell Size (mm) |
156 x 156 |
Number of cells |
6 x 10 – polycrystalline silicon cell |
Module Dimensions (mm) |
1640 x 992 x 40 |
Module Weight (kg) |
19 |
Front Glass |
3.2mm tempered glass |
Back Cover |
TPT(Tedlar-PET-Tedlar) |
Frame |
Anodized aluminum alloy |
Junction box |
IP65-6 by-pass diodes serviceable |
Connectors |
IP67 type MC4 |
Output Cables (mm) |
900 |
|
Pallet Dimension (mm) |
|
Pallet Weight (kg) |
520 |
1 Pallet |
24 modules |
Container Loading (ft) |
672modules |
Capacity 40’HQ |
(28 pallets) |
.
3KW Grid Tie Inverter
|
MODEL |
PVGI3000 |
Input (DC) |
|
Max. DC power (@ cos ϕ = 1) |
3,300W |
Max. DC voltage |
500V |
DC nominal voltage |
360V |
MPP voltage range/DC |
150 ~ 450V |
Min. DC voltage / start voltage |
120V |
Max. input current / per string |
1 x 13A |
Number of MPP trackers |
1 |
Output (AC) |
|
AC nominal power |
3000W |
Max. AC apparent power |
3000VA |
AC voltage range |
180-270V |
AC grid frequency; range |
50Hz/60Hz |
Nominal output current |
13A |
Power factor (cos ϕ) |
0.99 |
Harmonics |
< 3% |
Max. efficiency/ CEC efficiency |
96%/95% |
Protection devices |
DC reverse-polarity protection, AC short circuit protection, ground fault monitoring, grid monitoring |
General data |
|
Operating temperature range |
–25 °C to 60 °C |
Humidity |
0 ~ 100%RH(No condensing) |
Topology |
Transformerless |
Interfaces |
USB/RS232 card |
IP degree of protection |
IP65 |
Compliance |
CE/VDE0126-1-1/IEC62109/ENEL guide 2009,/ RD1663/G83/1-1/AS3100/AS4777 |
Warranty |
5 years |
Shipping Weight/Dimensions |
15kg/16x27x45cm |