|
|
|
|
0086-0512-62901304 |
0086-0512-62901305 |
|
|
|
0086-0512-62901305 |
|
|
lzmjmx |
|
|
lzm@yueniao.com |
|
zzl@yueniao.com |
|
|
|
alnew@yueniao.com |
|
|
|
|
Suzhou Yueniao Machinery&Electronics Imp&Exp Co Ltd |
|
|
1KW Off-Grid Wind/Solar Hybrid System
HY-1KW, 500W Wind/500W Solar
A "hybrid" electric system that combines wind and solar technologies offers several advantages over either single system.
In many regions worldwide, wind speeds are relatively lower in the summer when the sun shines brightest and longest. The wind is strongest in the winter when less sunlight is available due to shorter days. Even during the same day, in many regions worldwide, there are different and opposite wind and solar resource patterns.
Because the peak operating times for wind and solar systems occur at different times of the day and year, hybrid systems are more likely to produce electricity consistently throughout the year. It combines the best of both worlds !
Our hybrid systems are a combination of stand-alone wind systems. For the times when neither the wind nor the solar system is producing, our hybrid systems provide power through batteries.
Performance:100 - 180 AC Kilowatt-hours (kWh's) per month (depending on wind and solar resources)
This system includes:
500W Wind Turbine Generator
|
Model |
WFD500W |
Rated Power |
500W at rated wind speed |
Max Power |
600W |
Kilowatt Hours Per Month |
77 kWh/month /average 5.8 m/s |
Voltage Options |
24V, 36V& Grid Tie |
Start Wind Speed |
3 m/s |
Rated Wind Speed |
11 m/s |
Survival Wind Speed |
40 m/s |
Cut-Out Wind Speed |
13 m/s |
Over speed Protection |
Auto Furl and Electric Brake |
Temperature Range |
-30°C~60°C |
Rotor Diameter |
2.0 m |
Swept Area |
3.14 m2 |
Rotor speed |
580 rpm |
Rotor Starting Torque |
0.4 Nm |
Blade material |
Aluminum Alloy |
Rotor thrust(at 20 meters/second) |
175 Newton |
Generator |
3 phase Neodymium permanent magnet alternator |
Noise |
Max 1-3 dB above background |
Tower top weight |
26 kg |
|
.
250W Polycrystalline Solar Panel
|
ASNM250P-60 Series Polycrystalline Silicon PV Panel |
ELECTRICAL FEATURES |
STC: Irradiance 1000 W/m2, 25°C, AM=1.5 according to EN 60904-3) |
Module Type |
250P-72 |
Module Efficiency ŋm(%) |
15,37 |
Cell Efficiency ŋc(%) |
17,54 |
Power Peak Pm(W) |
250 |
Maximum Power Voltage Vm(V) |
30,71 |
Maximum Power Current Im(A) |
8,14 |
Open Circuit Voltage Voc(V) |
44,23 |
Short circuit current Isc(A) |
8,81 |
Maximum System Voltage (VDC) |
1000 |
Power output tolerances ( % ) |
±3 |
Max-Series Fuse (A) |
20 |
Operating/Storage Temp. (°C) |
-40 ~85 |
Dielectric Insulation Voltage (VDC) |
3000 max |
TEMPERATURE CHARACTERISTICS - STC |
NOCT–Nominal Operating Cell Temperature |
45±2°C |
Pm Temperature Coefficient (%/°C) |
-0.44 |
Voc Temperature Coefficient (%/°C) |
-0.36 |
Isc Temperature Coefficient (%/°C) |
0.033 |
MECHANICAL FEATURES |
Cell Size (mm) |
156 x 156 |
Number of cells |
6 x 10 – polycrystalline silicon cell |
Module Dimensions (mm) |
1640 x 992 x 40 |
Module Weight (kg) |
19 |
Front Glass |
3.2mm tempered glass |
Back Cover |
TPT(Tedlar-PET-Tedlar) |
Frame |
Anodized aluminum alloy |
Junction box |
IP65-6 by-pass diodes serviceable |
Connectors |
IP67 type MC4 |
Output Cables (mm) |
900 |
PACKING FEATURES |
Pallet Dimension (mm) |
|
Pallet Weight (kg) |
520 |
1 Pallet |
24 modules |
Container Loading (ft) |
672modules |
Capacity 40’HQ |
(28 pallets) |
.
1 KW Hybrid Controller and dump load
|
Model |
HD-1KW-24 |
HD-1KW-48 |
Rated output power |
1000W |
Input voltage range |
24~28V |
48~58 V |
Rated battery voltage |
24 V |
48V |
Max input wind power |
600W |
Max input solar power |
500 W |
Over charge protection |
29V±0.5V |
58V±0.5V |
Recommended battery |
24VDC/200AH |
48VDC/200AH |
Rated Wind Turbine
Maximum Input Current |
63 A |
30A |
Protection Function |
Over charge, battery reverse-connection Solar cells reverse charging, over load, load short-circuit, lighting, wind turbine automatic brake and manual brake. |
Self Consumption |
< 10 mA |
Shipping Weigtht/Dimension |
Controller: 7kg/340x280x160 mm,
Dump load: 1.8kg/310x150x85 mm |
.
.
1KW Pure Sine Wave Inverter
|
Model |
PI-1000-12 |
PI-1000-24 |
PI-1000-48 |
Output power |
1000 watts continuous power/2000 watts peak power |
Output voltage |
100/110/120/220/230/240VAC |
Optimum efficiency |
>85% |
No-load draw |
<0.8A |
Output wave form |
Pure Sine Wave |
Input voltage range |
10~15VDC |
21~30VDC |
42~60VDC |
Over voltage shutdown |
15.5V |
30.5V |
61.2V |
Under voltage shutdown |
9.5V |
19.5V |
42V |
Over load shutdown |
1200W |
Low voltage alarm |
Audible |
Protection |
Over voltage shutdown, Under voltage shutdown, Low voltage alarm, Over load shutdown, Thermal shutdown, Short circuit shutdown |
Warranty |
1 year |
Dimension(W x H x D) |
3.8 kg/260 x 182 x 100 mm |
Maintenance free Lead Crystal Battery
New Technology
The invention of the lead crystal battery is a breakthrough in battery history. Based on the composite electrolyte and proprietary intellectual property rights, makes the reaction of the electrolyte formation caused the forming for the crystal state.
Advantages
1. Ideal green and environmental protection battery.
Lead crystal battery is using special SIO2 composite electrolyte to replace the sulfuric acid solution of traditional lead-acid battery. The electrolyte is non-toxic, non-smell, to surrounding environment.
2. Excellent high and low temperature operating characteristics
Working temperature from -40°C~65°C
3. Easy for depth discharge
Working life of is no effected by the general over-discharge. Excellent recovery capacity of charge-discharge.
5. Long working life
Lead crystal battery can work for 10 to 15 years, and charging time is 25% faster than normal lead-acid batteries and gel batteries.
Item |
6-CNFJ-200 |
Nominal Voltage |
12V |
Nominal Capacity |
200Ah |
Working Temperature |
-40°C~65°C |
Dimension |
330 x 172 x 214mm |
Weight |
62 kg |
Terminal type |
A/F |
Charge Cycle |
1000 |
Working Life |
10 – 15 years |
|
Warranty : 10 years for solar panel and 3 years for the rest of the system
Claims & Return Procedures
In order to be eligible for service under this warranty, the Customer must send us pictures showing his installation of the system in 5 days after the installation.
If any problem takes place within the warranty period, Notification must be provided including a description of the alleged defect, the manner in which the wind turbine was used, the serial number, and the original purchase date in addition to the name, address, and telephone number of the party requesting warranty service.
.
Note:
- Power Curves and Annual Energy: The performance of wind turbine systems is impossible to predict with any certainty due to the variability in the wind from location to location and from year to year. These estimates are based upon the best available information but are given as guidance only and should not be considered as a guarantee. For a greater level of certainty we would recommend on-site wind speed monitoring for at least a year.
- Variation: All values are nominal as there will be some variation in manufactured product. Specifications subject to change.
.
.
|
|
|
|